DAYTEK HomeGardener 조립 지침 - 페이지 2

{카테고리_이름} DAYTEK HomeGardener에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYTEK HomeGardener 2 페이지.

FITTING THE WHEEL

5. INSERT AXLE THROUGH THE WHEEL HUB.

6. SLIDE AXLE SPACER OVER EACH END OF AXLE. ENSURE AXLE AND SPACER ARE POSITIONED CENTRAL IN THE HUB.

7. LOCATE ONE AXLE BRACKET AT POSITION 5 ON FRONT FRAME "B". SECURE BRACKET WITH 1 x LONG BOLT AND

TIGHTEN WITH WASHER & NUT AS SHOWN IN DIAGRAM BELOW.

8. INSERT ONE END OF AXLE AND WHEEL ASSEMBLY INTO THE AXLE BRACKET. ENSURE THE FLAT EDGE ALIGNS WITH

THE FORM OF THE AXLE BRACKET.

9. SLIDE THE SECOND AXLE BRACKET INTO POSITION ON THE OTHER SIDE OF THE FRAME. ALIGN THE AXLE TO ENSURE IT

SLOTS INTO POSITION AT THE SAME TIME.

10. SECURE AXLE BRACKET WITH 1 x LONG BOLT AND TIGHTEN WITH WASHER & NUT.

11. CHECK OVER ENTIRE ASSEMBLY, FULLY TIGHTEN ALL BOLTS AND ENSURE THAT THE WHEEL IS FREE TO SPIN.

v1.0