Dynacord PowerH Series 브로셔 및 사양 - 페이지 11
{카테고리_이름} Dynacord PowerH Series에 대한 브로셔 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynacord PowerH Series 12 페이지. Hi-end remote controllable power amplifiers
페이지 인쇄
DSP Functions
X-Over:
Linkwitz-Riley, Butterworth, Bessel
FIR Filters:
zero-latency processing, linear phase x-over
Master EQ:
6 filters per channel; PEQ, lo-shelf, hi-shelf, hi-pass, lo-pass selectable
Channel EQ:
6 filters per channel; PEQ, lo-shelf, hi-shelf, hi-pass, lo-pass, all-pass selectable
Master-Delay:
2 ms - 2000 ms per channel
Channel-Delay: speaker alignment
Dynamics:
compressor, limiter per channel
Protection:
advanced digital voice-coil protection algorithms
Misc.:
input routing, level, mute, polarity, sine and noise generators, VU meter
FIR Filters
Although FIR filters require a massive
amount of processing and are highly com-
plex, they are realized in the RCM-26 in addi-
tion to the classical filtering and signal pro-
cessing functions. Available are linear-phase
FIR filters and 'zero latency' FIR filters, which
add no further latency to the time signals
require to pass through the device.
Users can create their own linear phase
'brick-wall X-overs' and edit them in real
time.
Example: Linearization of a floor monitor
Original frequency response of monitors on stage
Zero-latency FIR equalization
Potential FEEDBACK frequencies
For Dynacord loudspeaker cabinets, measurements of the fre-
quency and phase response are already provided in the IRIS-
Net
™
. This data can be displayed and merged in IRIS-Net
together with the filter, crossover and delay settings. The
superposition then shows the acoustical frequency response of
Linear frequency response of the 'pre-linearized'
monitors on stage
the loudspeaker cabinet.
The IRIS-Net
™
module RCM-28 (under development) offers,
™
instead of the AES3 digital input, a CobraNet
making it possible to integrate PowerH power amplifiers into
CobraNet
™
networks.
™
interface,