Daytona 58835 사용 설명서 및 안전 지침 - 페이지 2
{카테고리_이름} Daytona 58835에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Daytona 58835 12 페이지. Heavy duty bottle jack
페이지 인쇄
Specifications
ITEM
58835
58815
IMPORTANT SAFETY INFORMATION
1.
Study, understand, and follow all
instructions before operating this device.
2.
Do not exceed rated capacity.
3.
Use only on a hard, level surface
capable of supporting the load.
4.
Support the vehicle with appropriate
means immediately after lifting.
5.
Failure to heed these markings may result
in personal injury and/or property damage.
6.
Lift only on areas of the vehicle as
specified by the vehicle manufacturer.
7.
No alterations shall be
made to this product.
8.
Only attachments and/or adapters supplied
by the manufacturer shall be used.
9.
Do not adjust safety valve.
Page 2
Weight Capacity
20 Tons (40,000 lb.)
12 Tons (24,000 lb.)
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
For technical questions, please call 1-888-866-5797.
Max.
Min.
Height
Height
20"
10-5/8"
18-5/8"
9-7/16"
10. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
11. Keep clear of load while
lifting and lowering.
12. Lower load slowly.
13. Do not use for aircraft purposes.
14. Apply parking brake and chock
tires before lifting vehicle.
15. Inspect before every use; do not
use if parts loose or damaged.
16. Keep your work area clean and well lit.
Cluttered work areas invite accidents.
17. Keep bystanders, children, and visitors
away while operating jack. Distractions
can cause you to lose control.
Protect others in the work area.
Base
Dimensions
5-3/4" x 7-5/8"
4-3/4" x 7-1/2"
Bottle Jacks