Daytona 64241 사용 설명서 및 안전 지침 - 페이지 9
{카테고리_이름} Daytona 64241에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Daytona 64241 13 페이지.
페이지 인쇄Troubleshooting
TO PREVENT SERIOUS INJURY:
Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load.
Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide
do not solve the problem, have a qualified technician inspect and repair the jack before use.
After the jack is repaired: Test it carefully without a load by raising and lowering it fully,
checking for proper operation, BEFORE RETURNING THE JACK TO OPERATION.
DO NOT USE A DAMAGED OR MALFUNCTIONING JACK!
Jack will
Saddle
not lift at
lowers
capacity
under load
does not lift all the way
X
X
X
X
X
64241 56641 64785
POSSIBLE SYMPTOMS
Pump stroke feels
Handle moves
spongy or Saddle
up when Jack
under load
X
For technical questions, please call 1-888-866-5797.
Fill Plug leaking
oil or Jack will not
lower without a load
X
X
PROBABLE SOLUTION
(Jack must not be supporting a load
while attempting a solution.)
Check that Release Valve
is fully closed.
Bleed trapped air from the hydraulics.
Valves may be blocked and may not
close fully. To flush the valves:
1. Lower the Saddle and securely
close the Release Valve.
2. Manually lift the saddle
several inches.
3. Open the release valve
and force the saddle down
as quickly as possible.
Jack may be low on oil.
Check the oil level and fill if needed.
See step 4 on facing page.
Jack may have air trapped
in the hydraulics.
Follow instructions for
Bleeding Trapped Air on page 6.
Jack may have too much
hydraulic oil inside, check
oil level and adjust if needed.
Fill Plug
Oil
Piston
Cylinder
FILL LEVEL
Page 9