Automatic DB 5801 사용 설명서 - 페이지 6

{카테고리_이름} Automatic DB 5801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automatic DB 5801 13 페이지. 250w multi tool

페이지 인쇄

energising power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench or

a key left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving

parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application. The

correct power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool's operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

h) This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

i) Children should be supervised to ensure

that they do not play with the appliance.