HIBLOW hp-120 매뉴얼 - 페이지 4

{카테고리_이름} HIBLOW hp-120에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIBLOW hp-120 9 페이지.
HIBLOW hp-120에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

HP- 100 / 120

STEP

Fit a new diaphragm and diaphragm ring in the

diaphragm base.

●Be sure not to leave a gap between them.

STEP

REPLACING THE VALVE

In case of replacing the whole diaphragm casing

block, move straight to

Separate casing A and casing B.

Remove the valves from the casing B.

●If it is difficult to separate them, insert the tip of a

flatblade screwdriver into the clearance.

●Pull out the valves as they can be removed easily.

STEP

Insert each new valve into the center hold of valve

seat, and secure them by pulling with radio pliers.

●When reinstalling the valves, make sure the exhaust

and intake sides are correctly fitted.

STEP

Cut away end of respective valves pulling parts

(just in front of thick parts) by scissors or nippers.

REPLACING THE CHAMBER BLOCK

STEP 12