Daytona DJS3TOR 사용 설명서 및 안전 지침 - 페이지 3
{카테고리_이름} Daytona DJS3TOR에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Daytona DJS3TOR 8 페이지. 3, 6 and 12 ton double locking pin jack stand
Daytona DJS3TOR에 대해서도 마찬가지입니다: 소유자 매뉴얼 (8 페이지), 사용 설명서 및 안전 지침 (8 페이지)
페이지 인쇄
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
1. Secure the chain to the jack stand by attaching the
split ring to the Hole near the Pawl. See Figure A.
2. Turn Post so that the teeth on its side face
the Pawl. Insert Post into the Base.
3. Bend Stop Tab in to secure the Post
into the Base. See Figure A.
CAUTION! Be alert to pinching hazard
when lowering the Post.
CAUTION! TO PREVENT INJURY: Before
using the Jack Stands, make sure the Post
cannot be pulled up and out of the Base.
4. Repeat Steps 1 through 4 with the other Jack Stand.
Jack Stand
For technical questions, please call 1-888-866-5797.
Stop Tab
Figure A
Pawl
Split Ring Hole
Split Ring
Page 3