HIBLOW hp-150 사용 설명서 - 페이지 8

{카테고리_이름} HIBLOW hp-150에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIBLOW hp-150 17 페이지. Air pumps
HIBLOW hp-150에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 매뉴얼 (8 페이지)

페이지 인쇄

(4) Loosen the U-lock nut and remove one of diaphragm mounting blocks from the rod, and pull out

the other diaphragm mounting block from the pump body together with the rod without loosening

its U-lock nut. (Figs. 7 and 8)

• Since we use powerful permanent magnets for the rod, take care not to get your ﬁngers pinched

by unexpectedly being attracted with its force.

• When pulling out the rod, take care not to allow the rod projection to accidentally to hit the lever of

the automatic stop switch, as this may result in the safety screw of the switch damaging or in its

malfunction.

��

(5) To replace the diaphragm of the removed diaphragm mounting block, with a new one, first

remove the diaphragm ring from the diaphragm, then the diaphragm from the diaphragm base.

The ring and the diaphragm can be easily removed by hand, and if it is difﬁcult to do so, then

hold them using radio pliers or the like, and pull them out one by one. (Figs. 9 and 10)

Fig. 9

��

Diaphragm base

Diaphragm

Diaphragm ring

CAUTION

��

Fig. 10

��

Diaphragm base

Diaphragm