HIBLOW hp-200 매뉴얼 - 페이지 6

{카테고리_이름} HIBLOW hp-200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIBLOW hp-200 8 페이지. Air pumps
HIBLOW hp-200에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

HP- 150 / 200

STEP

Install the locking collar from the other side of the

terminal and insert it until it clicks.

STEP

This completes the replacement of the safety pin

procedure.

Make sure the gap between L-shaped lever and

tab of the actuating rod is even.

●Be careful not to touch the terminal when the power is

on, testing the operating conditions as this will result in

an electric shock.

●Unplug the pump immediately after the check.

STEP

Install the sound absorber.

STEP

Place the upper housing back on body.

●Be extremely careful not to catch the sound absorber

on the upper housing.

Fasten it with the bolts.

Then, place the filter and filter cover on the

upper housing. (Refer to FILTER CLEANING AND

REPLACEMENT )

REPLACING THE CHAMBER BLOCK