Dynacord DMM 4650 기술 정보 - 페이지 12

{카테고리_이름} Dynacord DMM 4650에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynacord DMM 4650 19 페이지. Signal processor

Pressing the indicated key sets the cursor to the number

mark of the input.

Select the input 4 by pressing the indicated cursor key.

The bottom line of the display shows the momentary

setting for the port B, input 4, which would start the

sequence 26.

Programming the start of the sequence 03 you have to

press the indicated key twice to set the blinking cursor to

"6".

Press the indicated cursor key repeatedly until the

display shows the desired number of the sequence

(S03). Pressing the soft key "set" stores your setting into

memory.

From now on, pressing the external button at the input B4 activates the sequence 03.

Pressing the "EXIT" key twice ceases the programming.

The display is dimmed and you are able to test the

functioning of the sequence (example 1).

starttrg B.1 set

H >00,1s dyn S23

starttrg B.4 set

H >00,1s dyn S26

starttrg B.4 set

H >00,1s dyn S26

starttrg B.4 set

H >00,1s dyn S03

EXIT