Automatic WTLD018 사용 설명서 - 페이지 15

{카테고리_이름} Automatic WTLD018에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automatic WTLD018 16 페이지. 20v drill/driver

Drilling wood

• C lamp a piece of scrap wood to the back of your work to

prevent splintering.

All drilling operations

• Mark off the centre of the hole using a centre punch or nail.

• Don't force the drill, let it work at its own pace

• Keep the drill bit sharp.

• Reduce pressure, as the drill is about to break through

the item being drilled.

Chuck replacement

The chucks of reversible drills are always fixed by a screw

with a left-hand thread. The screw, which is located in the

centre of the chuck, must be removed before the chuck can

be removed. To remove the screw, turn it in a clockwise

direction. The chuck can now be removed by unscrewing it

anti-clockwise. If you have trouble removing the chuck take

the drill to your nearest authorised service centre for chuck

replacement.

CAUTION. Always ensure that the drill is switched off

and the battery pack is removed before making any

adjustments.

• Store the tools, instruction manual and where necessary

the accessories in the original packaging. In this way

you will always have all the information and parts ready

to hand.

• Do not throw used batteries into fire or water. There

is a danger of explosion! Please hand in non-working

or used batteries, or tools with built-in batteries, to the

environmentally-safe disposal unit at a municipal waste-

disposal centre, or to your dealer.

• I f the cordset of the charger is damaged or worn, have it

repaired or replaced by an authorised service centre.