iGolf GPS Caddie II 사용자 설명서 - 페이지 16
{카테고리_이름} iGolf GPS Caddie II에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. iGolf GPS Caddie II 18 페이지.
페이지 인쇄Appendices
Appendix A - Troubleshooting (Continued)
Problem 8: GPS points cannot be mapped/registered on device.
•
Ensure satellite strength is sufficient to obtain accurate data.
•
Move to a clear, unobstructed view of the sky (i.e. no trees, buildings or objects
that might interfere GPS satellite strength).
•
Time of day may affect GPS signal strength. Reattempt during various hours of the
day.
Problem 9: Entire golf course name cannot be entered in the space provided.
•
Limit the golf course name to 12 characters.
•
Abbreviate name so it can be identified from other golf courses on device.
Problem 10: There are no satellites in view.
•
Move to a clear, unobstructed view of the sky (i.e. no trees, buildings or objects
that might interfere GPS satellite strength).
•
The time required to acquire satellites may increase to 5-10 minutes for first use or
if device has not been used for an extended period of time.
Problem 11: The distances on the device are inaccurate.
•
Confirm correct golf course and hole number are selected from Play screen.
•
Move to a clear, unobstructed view of the sky (i.e. no trees, buildings or objects
that might interfere GPS satellite strength).
•
Go to Settings and set WAAS to "Off".
•
Go to Settings and set Stabilizer to "On".
•
Remap GPS points using device and confirm accuracy.
•
Report any GPS or scorecard errors found through iGolf.com.
28
User Manual
User Manual
Problem 12: The distances on the device are in yards, not meters.
•
Go to Settings and set device to display "Meters".
•
Confirm scorecard data entered correctly in meters.
•
If outside the U.S. and scorecard entered in meters, go to Settings and set
device to "Yards".
Problem 13: The distance displayed on the device is fluctuating.
•
Go to Settings and set Stabilizer to "On".
•
Move to a clear, unobstructed view of the sky (i.e. no trees, buildings or
objects that might interfere GPS satellite strength).
•
Go to Settings and set WAAS to "Off".
Problem 14: The USB cable will not connect to the device.
•
Firmly slide cable into device, ensuring cable is properly connected to device.
Problem 15: Sync software does not state "Connected".
•
Confirm USB cable is connected to computer.
•
Confirm USB cable is connected securely to the device.
•
Confirm sync software was installed correctly. Remove and reinstall software
if necessary.
•
Confirm correct COM port selected and switch on USB cable is set to "Data".
Appendix A - Troubleshooting (Continued)
Appendices
29