activecare medical Wildcat 450 소유자 매뉴얼 - 페이지 11
{카테고리_이름} activecare medical Wildcat 450에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activecare medical Wildcat 450 20 페이지.
For service assistance, please call your authorized ActiveCare dealer.
GENERAL INFORMATION
1.
Rotate the clutch lever of the gearbox inward (parallel to the wheels) to connect the drive.
2.
After seated on the wheelchair, turn on the power (Press the power button), and the
battery gauge will light up.
3.
Start to steer, moving the joystick to drive forward, backward, left or right. If you want to
stop the wheelchair, just release the joystick, it will return to the center position
automatically.
4.
We suggest at the beginning that you operate the power chair at a low speed until you are
comfortable enough to travel at a higher speed.
5.
For the user's safety, the speed is automatically reduced in half while the power chair is
turning.
6.
When you drive your power chair up an incline, push the joystick completely forward to
keep the power chair continuously climbing until you reach the top of the slope. While the
power chair is climbing a steep slope, position your body forward to prevent the front
wheels from lifting.
7.
When you operate your power chair down a slope, drive slowly and prepare for an
emergency stop if you feel it difficult to control the power chair. If the speed increases,
release the joystick and let it return to the center position to slow down or stop, then start
again at a slower speed.
8.
Flip-back armrest: Release the lock-pin and lift the armrest back to get on or off the power
chair more conveniently.
9.
Elevating swing-away footrest: Pull back the release-lever to adjust the elevating angle of
the footrest, and release the lever to fix the footrest angle.
CONTROLLER
Speed Down Button
Joystick
Speed Up Button
Wildcat/Wildcat 450 Owner's Manual
Operation
Service Indicator
Buzzer
Battery Gauge
Power On/Off
10