Celectron Audio LT10P 사용자 설명서 - 페이지 9

{카테고리_이름} Celectron Audio LT10P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celectron Audio LT10P 11 페이지.

WARRANTY AND PRODUCTS RETURN

• Celectron products have operating warranty and comply their specifications, as stated by manufacturer.

• Celectron warrants all materials, workmanship and proper operation of this product for a period of two years from the original date of

purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty

period, the owner should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect

detailed description. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Celectron Electronic

will verify damage on returned units, and when the unit has been properly used and warranty is still valid, then the unit will be replaced or

repaired. Celectron Electronic is not responsible for any "direct damage" or "indirect damage" caused by product defectiveness.

• Celectron products have been expressly designed for audio application, with signals in audio range (20Hz to 20kHz). Celectron has no liability for

damages caused in case of lack of maintenance, modifications, improper use or improper installation non-applying safety instructions.

• The installation of these speakers is provided for indoors, in case of use outdoors be sure that the speakers are installed correctly in a

safe location protected from wind, rain and humidity. To avoid performance deterioration of mechanical, acoustics and electrical parts is not

advisable to leave these speakers exposed outdoors for a long period of time, so we suggest a temporary installation for the limited sound

events.

• The installation of these speakers is provided for floor or by means of specific stands able to support their weight. Therefore avoid

installation on unstable elements such as: furniture, chairs and vibrant surfaces as stages or other speakers without appropriate fix point

specifically designed to avoid speaker movement. Then avoid the use of inadequate supports, we suggest to use CELECTRON stands and

accessories only.

• In case of the speakers are provided of rigging points: DO NOT SUSPEND THE SPEAKERS FROM THE HANDLES, use exclusively these rigging points.

Consult professional rigger or structural engineers prior to suspending loudspeakers from a structure not intended for that use. Always know

the working load limit of the structure supporting the loudspeakers. Always make sure that the rigging hardware minimum rating is at least five

times the actual load, speakers and rigging hardware.

• Locate the speakers as far away as possible from radio or television receivers or other sensitive equipment. These speakers have a

strong magnetic field which can induce hum and noise into unshielded devices that are located nearby with consequent deterioration of

reception of image and sound.

• Celectron Electronic reserves the right to change these specifications at any time without notice.

• Celectron Electronic declines any liability for damages to objects or persons caused by lacks of maintenance, improper use, installation not

performed with safety precautions and at the state of the art.