HiBoost Commercial 30K Pro 사용자 설명서 - 페이지 5

{카테고리_이름} HiBoost Commercial 30K Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost Commercial 30K Pro 20 페이지. Mobile signal booster

HiBoost Commercial 30K Pro 사용자 설명서
signal from the local cellular towers. It should also be as far away as possible
from where you plan to place the indoor antenna (vertical separation is more
important than horizontal separation).
3. Install the indoor antennas where you want to improve the signal level.
4. Mount the booster, connect the cables from the outdoor antenna and indoor
antenna at the designated ports, and connect the booster to the AC supply
(make sure all the cables are connected before applying power).
1.3 How to find the location with the strongest received signal
The outdoor signal strength the booster receives directly affects the efficiency of
the indoor coverage. That is why it is crucially important to install the antenna at
a good location and point it properly towards a tower where signal reception is
the strongest.
There are many methods that can be used to find the strongest signal from the
cellular towers. One is to use the LCD display on the booster that shows the
downlink power output of the booster in each band, the other is to use a mobile
phone or mobile phone app to test signal strength, and the third is to use a
commercially available signal strength meter.
We highly recommend that you use the LCD display on the booster as this
method is generally more convenient. However, in situations where the desired
carrier's signal is much weaker than the other local signals, using a mobile
phone, app or signal level meter can be a more accurate method of homing in
on the best signal for installation.
. LCD Display Method
Connect the outdoor antenna to the booster's outdoor port. Fix the outdoor
antenna on the roof of the building and point it to the nearest cell tower. Then
have a look at the gain and output power value displayed on the booster's LCD.
The outdoor antenna receives the strongest signal when the booster's downlink
output power reaches its highest level in each band. If the LCD shows maximum
5/19