Celectron Audio WD12A 사용자 설명서 - 페이지 4
{카테고리_이름} Celectron Audio WD12A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celectron Audio WD12A 12 페이지. Active floor monitors
페이지 인쇄TECHNICAL SPECIFICATIONS
MODEL
System type
Low Frequency Device
High Frequency Device
Angular Coverage
Frequency response
Max SPL at 1mt (peak)
Total Peak Power
Amplifier Continuous Power
Input Impedance
Input Sensitivity
Controls
Connectors
Power Supply
Maximum Consumption
Rated Consumption*
Construction
Pole Adapter
Handles
Monitor taper
Weight
Dimensions (W x H x D)
* Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.
WD10A
2-way coaxial vented stage monitor
10" woofer with 2"VC
1" compression driver with 1"VC
80°
60 Hz - 20 kHz
129 dB
700 W
HF: 50 W CLASS AB
LF: 300W CLASS D with SMPS
30 kohm balanced 15 kohm unbalanced
0 dBu
LEVEL, PRESET selector (MONITOR,
FOH), GND lift
IN: COMBO (XLR/JACK) LINK: XLR
230 VAC or 120 VAC - 50/60 Hz
365 W
215 W
Plywood with black anti-scratch
polyurethane paint
1 x side
2 x sides
36°
12 kg (26.4 lb)
490 x 265 x 375 mm
WD12A
2-way coaxial vented stage monitor
12" woofer with 2.5"VC
1" compression driver with 1.35"VC
80°
50 Hz - 20 kHz
130 dB
800 W
HF: 50 W CLASS AB
LF: 350W CLASS D with SMPS
30 kohm balanced 15 kohm unbalanced
0 dBu
LEVEL, PRESET selector (MONITOR,
FOH), GND lift
IN: COMBO (XLR/JACK) LINK: XLR
230 VAC or 120 VAC - 50/60 Hz
495 W
285 W
Plywood with black anti-scratch
polyurethane paint
1 x side
2 x sides
36°
15 kg (33 lb)
510 x 310 x 440 mm
WD15A
2-way coaxial vented stage monitor
15" woofer with 3"VC
1" compression driver with 1.35"VC
60°
45 Hz - 20 kHz
132 dB
1000 W
HF: 50 W CLASS AB
LF: 450W CLASS D with SMPS
30 kohm balanced 15 kohm unbalanced
0 dBu
LEVEL, PRESET selector (MONITOR,
FOH), GND lift
IN: COMBO (XLR/JACK) LINK: XLR
230 VAC or 120 VAC - 50/60 Hz
625 W
350 W
Plywood with black anti-scratch
polyurethane paint
1 x side
2 x sides
36°
21 kg (46.3 lb)
600 x 335 x 490 mm