HiBoost Home 4K 사용자 설명서 - 페이지 12

{카테고리_이름} HiBoost Home 4K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost Home 4K 20 페이지. Mobile signal booster

'2"

the LCD will return to the fixed display mode. (For more details refer to Manual

Gain Control (MGC) below.

When the LCD is in the alarm display mode, press the "SET" key and the LCD

screen will display the alarm indication showing the affected band. Pressing the

"|NC+" (or "DEC-") key and the LCD will switch to help tips. If none of keys are

depressed within 50 seconds, the display will return to the fixed display mode.

If none of the control keys are depressed within 5 minutes, the LCD screen will

turn off. Pressing any key will return the display to the fixed mode.

Manual Gain Control (MGC)

Since the booster has a self-adaptive smart automatic level control (ALC) and

isolation gain processing (ISO), most of the time manual adjustments are not

required to achieve good coverage. However, in some cases where the ALC or

ISO is working at a very high rate to adjust the gain and the Alarm or ISO LED is

flashing more than once a second a manual adjustment might be desired.

When the LCD is in the fixed display mode, press the "SET" key for more than 3

seconds. It will go into the "Gain Setting Mode" and make one of the gain

values start to blink.

. Press "SET" key shortly, and the LCD will switch to the next gain value and it will

start to blink. (Uplink or downlink gain for a different band).

- Press "|NC+" key once shortly and the gain will increase by 1dB, Press "DEC-"

once shortly and the gain value will be reduced by 1dB.

- Press the "SET" key for 3 seconds, and the LCD will return to the fixed display

mode.

Actual Gain display

MGC Setting Gain

Actual Power display

Note: When adjusting the gain manually, please ensure that the uplink gain is

equal to or not 5 dB less than the downlink gain setting. This avoids interference

with the local cell site tower network.

12/18