DaytonAudio BSA-200 사용자 설명서 - 페이지 4
{카테고리_이름} DaytonAudio BSA-200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio BSA-200 4 페이지. 200 watt bass shaker bridgeable stereo amplifier with remote
페이지 인쇄
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(a)
This device may not cause harmful interference.
(b)
This device must accept any interference received, including interference that
may cause undesired operation.
2. FCC Radiation Exposure Statement: Mobile device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency expo-
sure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation.
Important Safety Instructions
To reduce the risk of electric shock, do not remove cover. No user serviceable
parts inside. Refer servicing to qualifi ed personnel. To reduce the risk of
fi re and shock do not expose unit to rain or moisture. The unit should be
connected to an earth grounded AC electrical socket. The unit should be
operated in a well ventilated area. Minimum clearance is 2 inches.
Rated power output:
Bridged power output:
Input sensitivity:
Frequency response:
Variable low pass:
Distortion (stereo):
Distortion (bridged):
Signal to noise ratio:
Power requirements:
Max power consumption:
Stand-by power rating:
Auto turn-on sensitivity:
Dimensions:
daytonaudio.com
tel + 937.743.8248
®
Dayton Audio
110W RMS per channel into 2 ohms
230W RMS into 4 ohms
170 mV
5-200 Hz +/- 3 dB
50-200 Hz
1%
.05%
91 dB @100 Hz A-weight
110-240VAC
313W
0.5W
10 mV
2.5"H x 9.5"W x 8.5"D (not including rear connections)
5-Year Limited Warranty
See daytonaudio.com for details
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
For technical support
please contact:
Last Revised: 10/17/2018