HiBoost Smartlink Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} HiBoost Smartlink Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost Smartlink Series 10 페이지.

3.2 Find the cell tower

(1)Enter cellmapper.net

(2)Choose your own carrier and band here.

(3) Then enter the coordinate of where you are trying to

install the signal booster, and press Enter key.

(In fact when you open Cellmapper, the map on the right will automatically locate your area if you've given the site

permission to access your location. If you found tower sites that were not even showing up on the map, it may because

the app offsets the locations for security reasons.)

(4) The map on your right will jump to the location, then you can scroll the

mouse pulley, zoom it out, you will see the tower near the location. And

better to take a screenshot of this page for guiding the following installing

steps. If you have any questions, please contact our tech support.

Note: If you need help finding the tower, please contact our tech support

and provide your carrier, band and screenshots taken in the last steps.

3.3 Determine the outdoor antenna's position

The outdoor antenna is usually placed at one of the 4 ends of the roof.

Please choose the position according to the tower's location. Make sure

there are no barriers between the antenna and the tower.