GreatCo Gallery GI-29 주택 소유자 설치 지침 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} GreatCo Gallery GI-29에 대한 주택 소유자 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GreatCo Gallery GI-29 9 페이지. Electric heater with remote control

Method 2: Permanent Install

(1) Put 2 wood strips in existing

fireplace cut to fit the height of the

opening, and spaced 26.5" apart

(4) Put the fireplace insert into

place and using wood screws (not

included) attach the insert to the

surround and wood strips

shown locations.

Plug the power supply cord into a wall outlet (120Vac, 60Hz).The cord has a plug as shown at A.

You should follow as shown at the below:

42000 Rev C 8-26-13

(2) Fix the wood strips with

masonry

screws

appropriate screws for the material

you're attaching to.

(5)Attach front face trim by hanging tabs on top, then pressing lower pins into spring

clips at bottom

GROUNDING

Grounding methods

(3) set insert surround into place.

other

Run cord through passthrough

hole if necessary .

(6) Completed Assembly