DaytonAudio HTA100 사용자 설명서 - 페이지 4

{카테고리_이름} DaytonAudio HTA100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio HTA100 12 페이지. 100w integrated stereo hybrid tube amplifier

Controls and Functions

Front Panel

1. POWER SWITCH/INDICATOR

Turns the device on and off.

2. POWER INDICATOR

The ring surrounding the power switch will

illuminate amber when the unit is turned on.

3. METERS

Indicates the audio output level of the left and

right channels.

4. BASS CONTROL

Adjusts the volume level for the bass output.

5. TREBLE CONTROL

Adjusts the volume level for the treble output.

6. HEADPHONE OUTPUT

The headphone output allows you to listen to any

input privately without playing audio through your

speakers. The output accepts ¼" TRS headphone

connectors. Plugging in headphones here will cut off

the signal to the speakers and SW OUT [10].

NOTE: To avoid accidental damage to your head-

phones or speakers always turn down the volume

before connecting or disconnecting headphones.

7. VOLUME CONTROL

Turn this up to begin experiencing the warm natural

tone generated by the tube preamplifier.

8. SOURCE INPUT SELECTOR

Press the corresponding input button to select the

desired source. The corresponding light will illumi-

nate when the input is selected.

NOTE: PC-USB input will not be selectable

unless there is a device connected to the unit

and powered on.