HiBoost Hi10-5S 사용자 설명서 - 페이지 6

{카테고리_이름} HiBoost Hi10-5S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost Hi10-5S 12 페이지.

"沿

OOST

instructions on how to install the mounting bracket. please follow the steps below

to install the outdoor antenna with the mounting hardware included in the kit.

Note: Wrap waterproof tape around the connectors between outdoor antenna

and feeder line to avoid water or other kind of damage.

Step 2. Install Indoor Antenna

While determining where to install the indoor panel antenna, please ensure that

there is at least 20 ft (6m) of vertical separation between the outdoor and indoor

antenna. To avoid any oscillation issues, it is recommended that the outdoor

antenna is pointed away from the indoor antenna.

The signal is amplified

outwards by about 78

horizontally

The panel antenna included in this kit will be mounted to the wall. It has a

coverage area that is a sector with a tilted angle. The signal is amplified

outwards from the front of the indoor antenna at a horizontal angel of 80-

degrees. The height between the floor and the indoor antenna can vary.

Follow the steps below to install the indoor antenna.

1. Connect the indoor antenna to the booster using the coaxial cable.

＠

Top View of Room

＼

U-bolt

Indoor Antenna(Top View)