Gahl 102-1203 제품 설명서 - 페이지 4

{카테고리_이름} Gahl 102-1203에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gahl 102-1203 10 페이지. Belt driven air compressors

the tools.

High temperatures and moving parts are present in the air compressor, to prevent burns or

other injuries, Do not operate the air compressor with the fence cover. Allow the air compressor

to cool down before handling or servicing.

10) Be certain to red all labels when you are spraying paints or toxic materials, and follow the

safety instructions. Use a respirator mask if there is a chance of inhaling anything you are

spraying. Read all instructions and be sure that your respirator mask will protect you.

11) Always wear safety goggles or glasses when using an air compressor, Never point any

nozzles or sprayer towards a person or any part of the body.

12) Do not adjust the pressure switch or safety valve for any reason, Doing so will voids all

warranties and may cause serious personal injury.

13) Release the drainage from the tank on a daily basis, a clean and dry tank will help prevent

corrosion of the tank, in any circumstances, the air tank of the air compressor shall not be used

more than 7 years, longer use of air tank may cause serious personal injury. Air receiver tank

pressure test shall be done every two year. The surface of the receiver tank should be checked

every year, if there are serious rust, bumps or pressure test failure, then the air receiver tank

should be disposed.

14) Pull the safety valve at least on a weekly basis to check whether safety valve is functioning

properly, if the safety valve is found not functioning properly then it shall be replaced

immediately.

15) To provide proper ventilation for the cooling of the air compressor, the air compressor must

be kept a minimum 31cm distance from the nearest wall in a well ventilated area.

16) Fasten the air compressor securely if transportation is necessarily, pressure within the tank

must be fully released before transportation.

17) Protect the air hose and electric cord from damage, inspect them weekly for weak or worn

spots and replace them if necessary.

3. BRIEF INTRODUCTION OF THE AIR COMPRESSOR

This belt driven air compressor is of novel design and excellent workmanship, having the

advantage of fine appearance, easy operation, less oil waste, longer life, easy removing, low

maintenance cost, high safety. It can be widely used in machinery, chemical industry, spray and

decoration, automatic control system and other applications where compressed air is required.

4. OPERATING PRINCIPLE

4 / 10 pages