Automatic Solutions 750L I Range 설치 및 유지 관리 매뉴얼 - 페이지 3

{카테고리_이름} Automatic Solutions 750L I Range에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automatic Solutions 750L I Range 16 페이지. Sliding gate operators

페이지 인쇄

1. Electrical Connections

To commission the gate, move the gate

approximately 1m from the fully open position and

tighten the knurled wheel (Clockwise) engaging the

clutch assembly

Ensure the direction the gate travels is in

accordance with the opening and closing status

LED's, if not reverse two of the motor wires at the

inverter terminals.

Once Inverter settings are appropriately set proceed

to fine adjust the Limits for required operation

Press the opening button located under the dip

switches to begin opening cycle,

Inverter settings can be adjusted via the keypad i.e.

Opening speed, closing speed and ramp times.

Automation settings operating modes are able to be

adjusted via the CB6 board, refer to manual for

further instructions