DaytonAudio CS620W 사용자 설명서 - 페이지 4

{카테고리_이름} DaytonAudio CS620W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio CS620W 4 페이지. Contractor series

10) Caring For Your In-Wall Speakers

The two most common ways that in-wall speakers are permanently damaged:

1) Not enough power at higher volumes.

2) Too much power at higher volumes.

Contrary to conventional wisdom, far more speakers are damaged as a result of underpower-

ing, than by overpowering. When a receiver runs out of power, it still tries to reproduce the musical

signal by "clipping" the waveform. At loud volumes, this clipping introduces gross amounts of distor-

tion to the speaker, eventually destroying it. If the sound from your in-wall speakers starts to sound

distorted, turn down the volume.

Having plenty of reserve power will help your speakers reproduce dynamic contrasts and quick

transients of music much more effectively. But you do have to exercise good judgement; too much

power will also permanently damage a speaker. Again, if you hear distortion, turn the volume down.

Dayton Audio

Model number

Woofer

Tweeter

Frequency response (Hz)

Dimensions H x W x D (in)

Cut-out size H x W (in)

Power handling (RMS/Peak)

Impedance

SPL (1W/1m)

daytonaudio.com

tel + 937.743.8248

Speciﬁ cations

CS620W

6.5" poly cone

50-20,000

12" x 8-1/2" x 3-1/2"

10-3/4" x 7-1/4"

705 Pleasant Valley Dr.

Springboro, OH 45066

USA

1" Mylar

60/85

8 ohm

89 dB

Last Revised: 3/10/2017