HiBoost 10K Plus 설치 매뉴얼 - 페이지 11
{카테고리_이름} HiBoost 10K Plus에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost 10K Plus 14 페이지.
페이지 인쇄DL GAIN
OUTPUT POWER
LTE700
>=60dB
>=-5dBm
>=60dB
>=-5dBm
CELL800
>=60dB
>=-5dBm
PCS1900
>=60dB
>=-5dBm
AWS2100
10K Mate Plus
DL GAIN
OUTPUT POWER
LTE700
<60dB
CELL800
<60dB
PCS1900
<65dB
AWS2100
<65dB
DL GAIN
OUTPUT POWER
LTE700
<60dB
CELL800
<60dB
PCS1900
<65dB
AWS2100
<65dB
DL GAIN
OUTPUT POWER
LTE700
>=60dB
--/NEGATIVE
CELL800
>=60dB
--/NEGATIVE
PCS1900
>=65dB
--/NEGATIVE
AWS2100
--/NEGATIVE
>=65dB
NORMAL
LED LIGHT PATTERN
Alarm light and ISO
light solid green
OVERLOAD
LED LIGHT PATTERN
>=10dBm
Alarm light quick
>=10dBm
blinking green or red
>=10dBm
>=10dBm
LOOP BACK
LED LIGHT PATTERN
<10dBm
<10dBm
ISO light blinking
green or red
<10dBm
<10dBm
POOR SIGNAL
LED LIGHT PATTERN
Alarm light and
ISO light solid
green
REASON
REASON
Outdoor signal is
too strong
REASON
Inadequate
separation of the
indoor and outdoor
antennas
REASON
Input signal is too weak
10
SOLUTION
SOLUTION
Have your outdoor antenna
pointed slightly away from the
cell tower
SOLUTION
1、Increase vertical and
horizontal distance.
2、Make the indoor and
outdoor antennas face
opposite directions.
3、Add barriers(e.g. walls)
SOLUTION
1、Try adjusting the outdoor
antenna to the best direction
2、Try adjusting the outdoor
antenna to another cell tower
3、Try increasing the height of
the outdoor antenna and make
sure there are no barriers
between the tower and the
outdoor antenna
Please try these solutions until
the output power reaches or is
over -5dBm.