Automatic Solutions ABK 설치 및 사용 설명서 - 페이지 5

{카테고리_이름} Automatic Solutions ABK에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automatic Solutions ABK 17 페이지. Gsm intercom system

페이지 인쇄

Note: This unit is a 2G quad band system, operating on standard 2G network frequencies of

850/900/1800/1900MHz.

Please ensure the SIM card is a 2G compatible SIM card. The SIM may also

be 3G and 4G capable as well, as long as both the SIM and the network also

support 2G. Do not use a SIM card for a tablet, as these only support data, and

open

do not support voice and SMS. You simply require a mobile phone type SIM

card.

Put the SIM into a phone to activate and register it with the network.

If you are using pay and go, top up the SIM with some credit.

Test that the SIM can make and receive calls and can send and receive a SMS.

Ensure the power is OFF

Slide the SIM card holder in the open direction, and carefully open the door. Do NOT

force it.

Codelock Keypad connections (Keypad versions only)

Tamper

N/C

COM

OUT3

+ -

12v from

GSM unit

OUT1 OUT2

P a g e

| 5

Inserting the SIM card

Connections on the GSM Controller

open

12-15v dc

INT Lock

O/P1 inhib

Sense

(-)GND

DU out

N/O

K or A

N/C

GSM

modem

Optional

input limit

switch

from gate

Output

to gate

Exit button

or lock

Commonly used connections

Outputs – This keypad has 3 outputs. All can be

programmed for momentary and latching operation.

For gate systems and AC strike locks, connect a

keypad relay (normally open) in parallel with the GSM

module relay. For magnetic locks, connect in series

with normally closed contact.

Egress – This is for an optional exit button input,

connected across this terminal and GND (-).