DaytonAudio IO8XTB 사용자 설명서 - 페이지 5

{카테고리_이름} DaytonAudio IO8XTB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio IO8XTB 8 페이지. 8" 70/100v 8 ohm indoor/ outdoor 2-way speaker with bass radiator

페이지 인쇄

Transformer settings

Depending on your application you will need to adjust the transformer settings. If

you are using stereo amplifier the transformer should set to the 8 ohm position. If

you are using a 70V/100V amplifier set the dial to the desired 70V/100V tap setting.

Remove the endcap to expose the settings dial, this adjustment can be made with

flat head screw driver. Replace the endcap once the adjustment has been made.

70V

12.5W

100V

Final Installation

To install the speaker into their final location, place it into the yoke bracket and align

the threaded inserts in the enclosure for the endcap screws with the matching holes

in the yoke brackets, then install the endcap screws. Select an angle for the enclo-

sure that will allow the entire listening area to be within line-of-sight to the tweeter

dome, which is visible through the grill, and then tighten the endcap screws by hand.

At this time, installation is complete.

70V

12.5W

100V