DaytonAudio MKBOOM 조립 설명서 - 페이지 3

{카테고리_이름} DaytonAudio MKBOOM에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio MKBOOM 10 페이지. Mkboom bluetooth powered speaker kit

Enclosure Assembly:

1. First, set the enclosure parts out on a flat level surface and ensure that all pieces are free of dust and debris.

2. With the bottom panel lying flat, glue the internal walls in place making sure the front edges are flush with

the front of the bottom panel.

3. Next, glue the front baffle in place assuring all edges line up and are flush, and the internal walls fit into

their dados. Clamp in place and allow glue to dry per glue manufacturers recommendations.

4. Once glue is dry, glue in side and rear panels as shown below. Ensuring all outside edges are flush, clamp

and let glue dry as per glue manufacturer's recommendations.