GREATLAND GL 41 99 cc OHV 원본 사용 설명서 - 페이지 12

{카테고리_이름} GREATLAND GL 41 99 cc OHV에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREATLAND GL 41 99 cc OHV 20 페이지. Petrol lawnmowers

C- Items required for assembly



Pliers (may be useful)



0.6 Litre SAE 30 Oil



Fresh Petrol

IMPORTANT

fuelled as detailed in this manual before

–

NOTE

Reference to right hand or left hand side of the mower is observed from the rear of the

machine (operating position)

D- Assembly of the handle



Nip together the lower handle against the mounting bracket (using pliers).



Connect the lower handle, right bracket and left bracket with two knob nuts and two square neck bolts.



Lift the upper handle and align it with the lower handle. Tighten knob nuts or the quick lock handle to

the upper handle.



Raise the complete handlebar whilst depressing both levers to release the starter handle, taking care not

to crease the control cables at the pivot point.



Attach the control cables to the handle with cable ties and attach the recoil starter to the rope guide on

the upper handle

E-Cutting height adjustement

–

This lawnmower is shipped without fuel and oil. Ensure machine is oiled and

The cutting height adjustment lever is situated above the right rear wheel. To adjust

the cutting height, pull the height adjustment lever out and away from the

lawnmower and move forward or backwards into another slot depending whether

you want it to cut shorter (low) or longer (high).

NOTE

For rough and uneven lawns, move the height adjuster to a higher position as

this will stop scalping.

starting the engine.