Hiboy EX6 사용자 설명서 - 페이지 5
{카테고리_이름} Hiboy EX6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiboy EX6 14 페이지.
페이지 인쇄
Installing The Front Wheel
1
Spring
Spring
Skewer
End nut
3
1. Insert the front wheel in between the front fork on the bike. Be sure the fork is resting on the outside of the axle.
2. Shown in figure 2, align the wheel axle with the disc brake slot, put the brake disc into the disc brake slot. Keep
the skewer and spring on the RIGHT side of electric bike's riding direction, and the other spring and the end nut on the LEFT
side of electric bike's riding direction. Then insert the skewer into the wheel axle, shown in figure 1. BE AWARE TO DISTINGUISH
THE LEFT SIDE AND THE RIGHT SIDE.
3. Screw the skewer with the end nut and tighten.
4. Lock up the lever. Lift the lever up until parallel with the front fork. The front wheel is now installed.
2
Disc brake slot
Spring
Skewer
End nut
Spring
Brake disc
4
6
Installing The Pedals
1
1. Identify the Left and Right labels on the pedals. They can only be installed in their own side. INCORRECT INSTALLATION WILL
CAUSE DAMAGE. PLEASE BE AWARE TO DISTINGUISH LEFT & RIGHT BEFORE INSTALLATION.
2. L is for the Left pedal of the riding direction; R is for the Right pedal of the riding direction, the chain side.
3. Take the wrench integrated in the multi-function installation tool and use a wrench to tighten the nut in the direction of the arrow.
2
Left - Riding direction
Right - Riding direction
7