celesco PT8510 교체 지침 - 페이지 4
{카테고리_이름} celesco PT8510에 대한 교체 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. celesco PT8510 4 페이지. Measuring cable
페이지 인쇄36.
Connect a voltage meter to potentiometer terminals so positive lead is connected
to S and negative lead is connected to CW.
37.
Rotate entire potentiometer/mounting bracket assembly so output is between 0.04
and 0.1 VDC.
38.
Tighten socket head cap screw to lock sensor bracket in place
39.
Replace sensor cover, making sure o-ring seats properly.
40.
Replace the 4 socket head cap screws that attach the sensor cover to the housing.
Page 4 of 4