DaytonAudio Reference Series 조립 설명서

{카테고리_이름} DaytonAudio Reference Series에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio Reference Series 6 페이지. 8" mini subwoofer kit

Passive Reference 8" Mini Subwoofer Kit
Thank you for purchasing the Passive Dayton Audio Reference 8" mini subwoofer kit. The
enclosure for this speaker kit was precision cut using CNC machinery for a tight fit to
make it easy to finish. With a little time and patience, your finished product will provide
years of enjoyment. Please follow these instructions for the best possible results.
Suggested tools and consumables:
Drill
Screwdriver
Wood clamps (you can never have too many of these)
Sanding block and/or electric finishing sander
Wood glue
Package contents:
First, empty the contents of the package and review parts to ensure everything has been
included and is in good condition. If any parts are missing or damaged, please contact our
customer service department at 1-800-338-0531.
A) Dayton Audio RSS210HO-4 8" Reference Series HO Subwoofer 4 Ohm
Rag or paper towels
Solder
Wire stripper/crimper
#8 Wood Screws
Polyurethane glue (Gorilla Glue)
Driver: