Hiboy S2R 사용자 설명서 - 페이지 5

{카테고리_이름} Hiboy S2R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiboy S2R 14 페이지.

screws.

4. Battery Replacement And Charging

1. Insert the key into the keyhole

3. The handle jumps up automatically as soon as

the battery is unlocked

screws.

2. Turn the key to unlock the battery

4. Carefully pull the battery out of the step surface

of the e-scooter by the handle

(Fig.1)

(Fig.3)

(Fig.5)

1. Open the protective cap of the charging socket on the battery

(Fig. 1 and Fig. 2). Make sure the charging port and charger are dry.

Move the folded scooter by holding the front tube tightly with one hand or

2. Connect the charging cable to the charging socket (Fig. 3

and Fig. 4). The charging light on the charger will light red when

(Fig.2)

charging. The battery is charged once the charging light changes from

red to green. You should stop charging at this point.

3. Disconnect the charger from the mains and from the battery.

Connect the charging socket on the battery.

4. Check the battery container and battery are dry before you insert

(Fig.4)

the battery back into the e-scooter. Insert the battery into the e-scooter

and press the handle down (Fig. 5 and Fig. 6) until the lock audibly

clicks into place.

(Fig.6)

EN-12