Dynaflow MK5 Eco 매뉴얼

{카테고리_이름} Dynaflow MK5 Eco에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynaflow MK5 Eco 8 페이지.

Introduction

Welcome to the Dynaflow ® MK5 Eco Control Panel. This panel has been designed by Dynaflow

specifically for the Dynaflow Fume Cupboard. The MK5 Panel has been "Product Certified" ISO

Product Certification to compliance to AS/NZS 2243.8 2014. The MK% has been designed to provide

simple "Function" changes and ease of "Plug and Play" accessories to allow for quick upgrade and

replacement options.

Please find and overview of the MK5 Eco Control Panel below.

Panel Layout

The Dynasafe® Control System MK5 Fume cupboard controller has 4 key aspects

represented on the front panel.

 A Graphical LCD display which provide the bulk of the user feedback information.

 5x press buttons which allow user interaction.



USB port.



Emergency Stop button.

Panel functions

1. Air flow indicator - indicates when air flow within the cupboard and duct work

meets acceptable requirements

2. Display - indicates cupboard status to the operator. Shows time, current mode,

status information and key functions. Refer display breakdown for more information.

3. Emergency Isolator - used to isolate the cupboard from electrical and gas services in

the event of an emergency.

4. Supply Fault - indicates Mains failure, will flash red should Mains supply fail. The

controller is then operating on batteries.

5. Function switch - used by the operator to enter and exit setup and configuration

options.

6. USB Port - This port provides USB connection to external computers. It is primarily

used for test and commissioning of the cupboard. It provides no user data.

7. Light switch - controls the cupboard lighting.

8. Fan switch - used to start and stop the cupboard.

9. Boost switch - if the cupboard is fitted with Syncroflow® then can be used to boost

airflow.

10. Mute Switch - used to mute buzzer during alarm states. Please note that should a

new alarm occur then the mute will be removed from the alarm. Once the alarm has

been corrected then the buzzer will turn off automatically.

MK5 Eco Panel overview