GAI-Tronics 7115-002 소개 - 페이지 2

{카테고리_이름} GAI-Tronics 7115-002에 대한 소개을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 7115-002 5 페이지. Desk-edge subsets

Models 611C, 6115, 711-002, and 7115-002 Desk-edge Subsets

Installation

1. A mounting angle bracket is provided with the subset. See

Figure 1 for the location. Install the angle bracket on a desk or

similar location using the appropriate hardware for the two 0.220-

inch diameter holes.

2. Mount the subset enclosure onto the angle bracket with the

supplied hardware. Three sets of positioning holes allow

incremental right- or left-hand adjustments. Figure 3 shows one

typical mounting situation.

3. The attached subset cable plugs directly into the mating connector

in the base of the amplifier enclosure.

GAI-Tronics offers two types of Page/Party™ systems: Page/single-party with one party line, and

page/multi-party with five party lines, allowing up to five simultaneous two-way conversations.

Page/Single-Party: To initiate a call, lift the station handset and press the page button or the handset

press-bar. Speak directly into the handset. The paged individual(s) lifts the handset of the nearest

Page/Party™ station for two-way communication over the party line.

Page/Multi-Party: Select an available party line with the five-position selector switch. Speak directly

into the handset indicating the party line being used. The paged individual selects the indicated party line

and lifts the handset for two-way communications.

\\s_eng\gtcproddocs\standard ioms - current release\instr. manuals (42004)\42004-152b.doc

7/98

Figure 3. Typical Mounting Situation

2 of 5

Page:

Pub. 42004-152B

Figure 2. Top View

w/Handset On-Hook

(Model 7115-002 shown)