GAI-Tronics 7165-102 사용자 설명서 - 페이지 5

{카테고리_이름} GAI-Tronics 7165-102에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 7165-102 12 페이지. Flush-mount subset

Model 716-102 and 7165-102 Flush-Mount Subsets

Installation

WARNING

Do not install this equipment in hazardous areas. Such installations may

cause a safety hazard and consequent injury or property damage.

1. Refer to Figure 5 and Figure 6 for the multi-party and single party subsets cutout details, respectively.

Drill and tap four holes in the mounting surface for No. 10-32 machine screws (included) according

to the measurements shown in to Figure 5 and Figure 6.

2. Feed the subset cable into the mounting hole.

3. Secure the subset to the mounting surface using four No. 10-32 screws and the mounting holes.

4. Plug the subset cable into the amplifier enclosure and secure the connector with the connector guard

(located on the amplifier enclosure).

Figure 5. Model 7165-102 Cutout Details

f:\standard ioms - current release\42004 instr. manuals\42004-643l2e.doc

04/13

Figure 6. Model 716-102 Cutout Details

Pub. 42004-643L2E

Page 5 of 10