GAI-Tronics Clean Phone 295F 매뉴얼

{카테고리_이름} GAI-Tronics Clean Phone 295F에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics Clean Phone 295F 19 페이지.

Clean Phone™ Telephone

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains

sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-

Tronics retains all intellectual property and other rights in or to the information contained herein, and

such information may only be used in connection with the operation of your GAI-Tronics product or

system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any

third party.

General Information

The GAI-Tronics Model 295F Flush-Mount and Model 295W Wall-Mount Clean Phone™ Telephones

are designed for the exacting requirements of clean rooms. They are constructed of stainless steel and

have a completely smooth polyester front panel that will not trap particulate matter. Calls are made by

pressing one of the two auto-dial buttons or by using the fully functional keypad. The Flash button

allows the phone to use the features of a PBX system. The oversized, clearly labeled buttons allow for

easy operation with gloved hands.

Auto-Dial Buttons

The Model 295 Clean Phones feature two auto-dial buttons to store frequently dialed telephone numbers.

If using the auto-dial feature, it is important to program the Auto-dial Time Delay option, which sets the

amount of time lapse between the auto-dial button press and the actual dialing operation. The default

time period of ten seconds could be too long if the feature is to be used for emergency communication.

This feature is fully explained in the Programming Information section.

Auto-Answer

The Model 295 also offers a programmable activation/deactivation of the Auto-answer feature. When

activated, this feature determines how many rings must elapse before auto-answering. The Auto-answer

feature allows the telephone to go off-hook automatically so technicians do not have to leave their work

stations to answer the telephone.

A light under the ON portion of the ON/OFF button is activated to indicate if the telephone is off-hook.

If the Auto-answer feature is not activated, the telephone will not go off hook until someone actually

touches the ON/OFF button.

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374

ISIT WWW

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

Model 295F and 295W

800-492-1212

GAI

TRONICS

COM FOR PRODUCT LITERATURE AND MANUALS

Fax: 610-796-5954

Pub. 42004-146H