GAI-Tronics PHP400 설치 및 사용자 설명서 - 페이지 3
{카테고리_이름} GAI-Tronics PHP400에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics PHP400 20 페이지. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
GAI-Tronics PHP400에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (20 페이지), 디자인 설치 및 사용 설명서 (20 페이지)
Safety and Care Information
1.
▲
IMPORTANT: THIS EQUIPMENT CONTAINS HAZARDOUS VOLTAGES
▲
THIS EQUIPMENT MUST BE EARTHED
▲
MAINS SUPPLY MUST BE ISOLATED ELSEWHERE BEFORE OPENING THE
CASE.
▲
Cabling and connections must be in accordance with local electrical safety
regulations (such as BS7671 IEE regulations, latest edition).
▲
Mains connection must be made via a 2 pole disconnection device, with a
minimum contact clearance of 3mm.
▲
Please read these instructions thoroughly before starting installation. These
products must be installed and maintained by qualified, competent personnel
familiar with telephone installation.
▲
Telephone network voltages can be hazardous. Take adequate precautions
when opening the case or installing. If in doubt, disconnect the telephone line
elsewhere before accessing the line connections.
▲
For increased protection against lightning transients, attach a local earth to the
main terminal block (see section 6.4)
Product Description and Features
2.
This manual describes the analogue (PSTN) version of the GAI-Tronics 400mm circular
Help Point. This product is based on the standard 1090/1099 Help Point product range
and has been specifically configured for use on rail platforms, with features including:
•
Weather and vandal resistant casing
•
Large, palm-operable, vandal resistant buttons
•
Internal induction loop
•
Raised text and Braille legends
•
Wide operating temperature range
•
Auto-dial numbers are remotely programmable
•
230Vac powered for induction loop and relay outputs
•
Line powered phone operation
•
4 auxiliary inputs, 2 volt-free contact outputs
Models are available with different pushbutton options.
PHP400 Analogue Help Point.
3