GAI-Tronics Titan CB 설치 및 사용자 설명서 - 페이지 8

{카테고리_이름} GAI-Tronics Titan CB에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics Titan CB 20 페이지. Weather resistant telephones

Only fit a second gland if a separate cable is required to the phone (for

example for an additional hook contact).

2. Select the appropriate sized gland:

Use the smaller gland for cables

diameters 4 - 7mm.

Use the larger gland for cable

diameters 8 - 13mm.

3. From the outside of the case, insert

the selected gland into the threaded

cable entry hole and tighten, so that

its sealing washer is compressed

against the enclosure surface.

4. Proceed with chosen mounting method below

5.2. Titan

As standard, Titan with rear enclosure is supplied with 2 cable glands with

sealing washers, 4 countersunk screws with wall plugs and a 3mm Allen key.

Titan telephones supplied for flush mounting have no rear enclosure – see

section 5.2.3 below.

5.2.1

1. Using a suitable tool, punch out the 4 holes in the rear enclosure,

taking care not to damage or dislodge the plastic bushes. Only four

Wall mounting

Titan CB, Commander CB