Automatic Technology GDO-11V3 Ero 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Automatic Technology GDO-11V3 Ero에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automatic Technology GDO-11V3 Ero 20 페이지. Overhead garage door opener
페이지 인쇄
5. User Operating Controls
Button (Fig 5.1)
1. OPERATE
2. CODING LED (Red)
3. DOOR CODE (Blue)
4. DOOR STATUS LED (Yellow)
5. OPEN LED (Green)
6. CLOSE LED (Red)
7. SET (Orange)
Fig. 5.1
Door Status Indicators
Open
Close
Opening
Closing
Door travel stopped
Door obstructed when opening
Door obstructed when closing
Opener overloaded
Mains power interrupted
Function
Opens/stops/closes the door
Flashes when a code is being stored or when the transmitter button is
pressed
Is used for storing or erasing transmitter buttons for door operation
Illuminates when Service is due.
Illuminates and flashes as the door opens and remains on when the open
limit position has been reached.
Illuminates and flashes as the door opens closes, and remains on when the
close limit position has been reached.
Is used during installation. The SET button is also used to program the PET
(Pedestrian) position and to re-initialise the opener.
03
02
04
OPEN LED (green)
On
Flashing
Flashing
Flashing
Alternating flashes
Rapid flashes
GDO-11V3 Ero
TM
Home Owner's Manual
01
07
05
CLOSE LED (red)
On
Flashing
Flashing
Flashing
Alternating flashes
7
06
Beeper
Beeps while door is
moving
Beeps while door is
moving