Greatneck 80160 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Greatneck 80160에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Greatneck 80160 20 페이지. Variable speed jigsaw
페이지 인쇄!
WARNING:
plug your jigsaw into the power source
until you have carefully read and
understood this Owner's Manual.
Always wear eye protection.
Any power tool can throw
foreign objects into your eyes
and cause permanent eye
damage. ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety
standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE
NOT safety glasses.
!
WARNING:
not in compliance with ANSI Z87.1
could cause serious injury when they
break.
!
WARNING:
mask when sawing.
Use hearing protection, particularly
during extended periods of operation.
Do not wear gloves, neckties or loose
clothing.
Do not saw material too small to be
securely held.
Make sure there are no nails or foreign
objects in the part of the workpiece to be
sawed.
SPECIFIC SAFETY RULES
For your safety, do not
Glasses or goggles
Always use a dust
SAVE THESE INSTRUCTIONS FOR REFERENCE
Always keep hands out of the path of
the saw blade. Avoid awkward hand
positions where a sudden slip could cause
your hand to move into the path of the saw
blade.
To avoid injury from accidental starting,
always remove the plug from the power
source before installing or removing a saw
blade.
Make sure the saw blade is sharp and in
good condition. This will ensure cleaner
cuts and reduce the risk of breaking the
blade.
Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will make exposed metal
parts of the tool "live" and shock the
operator.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand
or against your body leaves it unstable and
may lead to loss of control.
9