DynaGen GSC400 Series 캘리브레이션 유틸리티 매뉴얼 - 페이지 6
{카테고리_이름} DynaGen GSC400 Series에 대한 캘리브레이션 유틸리티 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaGen GSC400 Series 18 페이지. For generator
DynaGen GSC400 Series에 대해서도 마찬가지입니다: 프로그래머 매뉴얼 (4 페이지)
페이지 인쇄
2.1 Definitions
ACC_MH – AC Current Measured High
ACC_ML – AC Current Measured Low
ACV_MH – AC Voltage Measured High
ACV_ML – AC Voltage Measured Low
ACC_RH – AC Current Reference High
ACC_RL – AC Current Reference Low
ACV_RH – AC Voltage Reference High
ACV_RL – AC Voltage Reference Low
LOW_CUR_WEIGHTED_AVG – 5
LOW_VOL_WEIGHTED_AVG – 2
ACC_S – AC Current Slope
ACV_S – AC Voltage Slope
ACC_O – AC Current Offset
ACV_O – AC Voltage Offset
2.2 AC Current Slope Calculation
slope = (ACC_MH – ACC_ML) / (ACC_RH – ACC_RL)
If slope < 0.78 Then
ACC_S = -126
Else If slope > 1.4 Then
ACC_S = 126
Else
ACC_S = (1 - (1 / slope) * 440
End If
2.3 AC Voltage Slope Calculation
slope = (ACV_MH – ACV_ML) / (ACV_RH – ACV_HL)
If slope < 0.929 Then
ACV_S = -126
Else If slope > 1.083 Then
ACV_S = 126
Else
ACV_S = (1 - (1 / slope)) * 1651
End If
6 of 18