GAI-Tronics Titan 설치 및 사용자 설명서 - 페이지 6

{카테고리_이름} GAI-Tronics Titan에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics Titan 14 페이지. Illuminated crossing telephone

2.2 Suitability For Use

Crossing Telephones are suitable for connection to either loop disconnect or

multifrequency (tone) dialling telephone lines.

Connection may NOT be made to shared service (party) lines.

The telephone is NOT suitable for connection to a PABX which returns

secondary proceed indication

2.3.1

Light Panel Current Selection

It is possible to give the legend panel and PRESS button illumination by wiring

the connections 1 and 2 together. A jumper is available to select, 5mA, or 1mA

of current from the line. The jumper is supplied in the 5mA position, (maximum

light output). For 1mA the jumper must be left off. It is advisable to select the

maximum current setting possible to give the best light output.

2.3.2

Timer Selection

Set the call time-out selector as required. If set to the ENABLE position, calls

will terminate after approximately 7 minutes even if the handset is still off hook.

Titan Illuminated Crossing Telephone

Figure 2 – Circuit Board with Option Setting