Greaval GV-8S 사용자 설명서 - 페이지 5

{카테고리_이름} Greaval GV-8S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Greaval GV-8S 7 페이지.

This is a function for your receiver only. You will Not transmit the alarm.

BATTERY SAVER

Reduces the battery power used when not receiving a signal. Battery saver turns on

automatically 10 seconds after no signal is received and no operation is being

performed.

BATTERY LOW ALERT

Reminds you that battery needs recharging. Alert tone will sound and Red LED will

blink.

MONITOR

When no signal is being received, Press and Hold the MONI. This is helpful for

adjusting volume level and receiving weak signals.

* BUSY CHANNEL LOCK-OUT (BCL)

BCL prevents you from transmitting on a channel if a signal is present. Pressing the

PTT switch while a channel is in use will emit an alert tone and inhibit the transmitter.

* BEEP TONE

If turned on, radio will give short tone to indicate that there is nothing programmed

for that channel.

* CTCSS / DCS

CTCSS (Continuous Tone Coded Squelch System) or

(Digital Coded Squelch).

You may sometimes want to hear calls only from specific persons or groups. This

option allows you to ignore unwanted calls from others on the same frequency. These

tones are sub-audible (cannot be heard) and are selectable via software.

Note: These tones do NOT cause your conversation to be private or scrambled. It only

relieves you from listening to unwanted conversations.

SUMMARY of FUNCTION ACTIVATION

Ch 1-5, Press / Hold both PTT and MONI, and Power ON

VOX - ON / OFF.

Ch 10, Press / Hold both PTT and MONI, and Power ON

CTCSS / DCS Description