GAI-Tronics 234WM-202 사용자 설명서 - 페이지 3

{카테고리_이름} GAI-Tronics 234WM-202에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 234WM-202 13 페이지. Wall-mount stanchion assembly

Model 234WM-202 Wall-Mount Stanchion Assembly

Model 84505-202 Wall-Mount Stanchion Installation

1. Remove and save the two tamper-resistant screws at the top of the stanchion. See Figure 1.

: GAI-Tronics Model 233-001 Security Screwdriver (sold separately) is required to remove the

OTE

tamper-resistant screws.

2. Remove the wall-mounting assembly from the front panel assembly. Refer to Figure 1. Detach the

chain from the wall-mounting assembly. See Figure 2.

3. Enlarge the conduit entry pilot hole(s) to be used for the stanchion power cables. See Figure 3.

4. Fasten the wall-mounting assembly to a wall or flat surface that can support at least 50 pounds, using

3/8-inch bolts. Refer to Figure 2 for mounting hole dimensions and ADA height requirements.

p:\standard ioms - current release\42004 instr. manuals\42004-308g.docx

04/16

Figure 2. Wall Mounting Instructions

Pub. 42004-308G

Page 3 of 11