GAI-Tronics 294-103AL S.M.A.R.T 매뉴얼 - 페이지 14

{카테고리_이름} GAI-Tronics 294-103AL S.M.A.R.T에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 294-103AL S.M.A.R.T 20 페이지. Externally powered emergency phones

페이지 인쇄

S.M.A.R.T. E

XTERNALLY

Basic Programming Commands

The following programming commands can be entered from any touch-tone telephone. Acceptance of

data transfer commands is indicated via a return code transmitted as an audible DTMF tone.

Auto-dial Memory

When the EMERGENCY button is pressed, the S.M.A.R.T. Phone dials a pre-programmed telephone

number (the primary number). If the call cannot connect (line busy, no answer), the phone will redial

using the first backup (roll-over) number. If again the call cannot connect, the phone will redial using the

second backup (roll-over) number. This sequence will continue until either the emergency call is

answered, or three call attempts are made. This factory setting of three call attempts can be changed

through TMA with the Number of Call-In Retries setting.

Use the *1 command to program these three auto-dial numbers. The three auto-dial telephone numbers

are labeled as 11 (primary), 12 (first roll-over), and 13 (second roll-over). You can program these for

three different numbers, or set them to the same telephone number. Each auto-dial memory storage

location accommodates up to 24 characters.

To enter the auto-dial number into memory storage, or to change the number in storage, enter

*11<N><

CHAR

Data transfer command

1<N>

Auto-dial memory location (N = 1, 2, or 3)

Telephone number to be stored in memory location (up to 24). Valid entries are

CHAR

0-9 and the following 2-digit codes: *1 provides a 0.6-second pause in the

dialing sequence, *2 provides a DTMF #, and ** provides a DTMF *.

End-of-string indicator

The command *1115551212#, for example, sets the primary number to 555-1212.

After each auto-dial memory storage location is successfully programmed, the phone returns a system-

generated DTMF check-digit.

If the phone is installed on a ring down telephone line, clear the first auto-dial memory using the

command *111#.

d:\standard ioms - current release\42004 instr. manuals\42004-377c.doc

08/06

ADA-C

OWERED

OMPLIANT

MERGENCY

HONES

PUB. 42004-377C

13 of 18

AGE