Dayva HS041-2 사용 설명서 - 페이지 17

{카테고리_이름} Dayva HS041-2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dayva HS041-2 19 페이지. Premier outdoor heater

DAYVA PREMIERE OUTDOOR HEATER

TROUBLE SHOOTING

PROBLEM 2

Large Yellow Candling Flame

CAUSE

This can occur after a period of non-use. Most likely

debris, dirt or a spider web has gotten into the orifice.

SOLUTION

CLEAN THE ORIFICE

1. Remove the hood and emitter by removing the (4)

screws that attach the emitter screen to the burner plate.

2. For easier access, also remove the top section of the

post. This can be accomplished by first removing the

regulator from the hose. Then remove the top neck

portion from the post.

3. With phillips screwdriver, remove the bracket holding

the thermocouple and electrode (igniter) in place. Once

removed, push both to the side, free from the burner.

4. With channel locks, remove each screw (2), located

directly under the burner, by turning counter-clockwise.

5. Pull burner free from burner plate.

6. The Orifice will now be exposed.

7. Examine for debris, dirt or spider webs and clean as

necessary.

* Make sure not to push obstruction farther down orifice.

8. Once cleaned, re-assemble burner to burner plate,

REMOVE WITH

thermocouple and electrode to bracket, top neck section

CHANNEL LOCKS

TURNING

to post and regulator to hose.

COUNTER-CLOCKWISE

9. Make sure to use teflon tape when re-attaching

regulator.

10. Check for leaks (refer to Solution for Problem 1,

Cause A).

11. Re-light heater to test.

ORIFICE

Please also reference the Instruction Manual for further

Trouble Shooting information.

If neither Trouble Shooting Giude remedies the problem,

please contact your Dayva retailer or Dayva International.