GAI-Tronics 297-103 매뉴얼 - 페이지 11

{카테고리_이름} GAI-Tronics 297-103에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 297-103 20 페이지. Externally powered emergency phones

PUB. 42004-377C
10 of 18
S.M.A.R.T. E
P
ADA-C
E
P
P
XTERNALLY
OWERED
OMPLIANT
MERGENCY
HONES
AGE
Figure 7. Emergency Phone PCBA

Audio Level Adjustment

The speaker volume and microphone sensitivity are factory set to nominal levels that are acceptable for
most installations. However, some installations may require adjustments for the speaker and microphone.
Both the speaker and microphone adjustments are made using potentiometers on the emergency phone
PCBA. R106 is the speaker volume adjustment, and R88 is the microphone sensitivity adjustment. Refer
to Figure 7 for the potentiometer locations.
Special care must be given to adjusting the speaker volume and microphone level. If one or both of the
levels are set too high, acoustic feedback (howling) can occur. If acoustic feedback occurs, we
recommend returning both potentiometers to the nominal factory settings and beginning the adjustment
again from this point.
d:\standard ioms - current release\42004 instr. manuals\42004-377c.doc
08/06