GAI-Tronics PHP400 디자인 설치 및 사용 설명서 - 페이지 15
{카테고리_이름} GAI-Tronics PHP400에 대한 디자인 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics PHP400 20 페이지. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
GAI-Tronics PHP400에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (20 페이지), 설치 및 사용자 설명서 (20 페이지)
페이지 인쇄
Environmental limits
Temperature:
Operating: -20° C to +60° C (-4° F to 140° F)
Storing: -40° C to +70° C (-40° F to 158° F)
Relative
Up to 95% (non-condensing)
Humidity
Ingress
IP65 to EN60529:1992 – Degrees of protection provided by enclosures.
Protection
Physical characteristics
Casing
Front section: Stainless steel
material
Rear section: Mild steel, zinc coated
Finish: Polyester powder coated
Weight
6.5kg (11lbs).
Dimensions
405mm diameter. 88mm depth. Buttons may protrude a further 10mm
from front face.
Compliance to standards
European
1999/5/EC – European Radio & Telecommunications Terminal
Directives
Equipment Directive.
2011/65/EC - Restriction of the use of certain hazardous
substances in electrical and electronic equipment (recast)
(RoHS 2) Directive
2002/96/EC - Waste Electrical and Electronic Equipment (WEEE) Directive
EMC
EN55022 – Information technology equipment. Radio disturbance
characteristics.
EN55024– Information technology equipment. Immunity characteristics.
EN 50121-4 - Railway applications, emission and immunity
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
400mm VoIP Help Point, 48V VoIP.
15